Illusions - Spring 2014 |
I did have to shorten the article quite a bit for publication so I thought you might like to read the full version here on Teardrops & Tiger Stripes. I also have a bonus EXCLUSIVELY for those that will sign up to receive T&TS by email (fill out that little white box to the left...yeah, that one.) I will send you the step-by-step images of the two designs featured in the article...THAT'S RIGHT! I did step-by-steps for both the flaming skull and the cute leopard, that didn't make it into the issue and I will send them to your email address if you subscribe to my blog. You lucky subscribers you. :)
You do have to enter your "verified" email address so I'll know where to send them. And don't cheat by asking me on Facebook or by email! I want you to subscribe to the blog because the more subscribers I have, the more fun we can have in the future like contests and drawings, so there is a method to my MADNESS!
So, here it is, the "Director's Cut" original article written for submission to Illusions Magazine:
The Star of the Show!
Denise Cold PaintedParty.com |
Mehron’s Starblend Makeup is making its way to the top of many
painter’s kits. Why? Denise Cold writes this informative article helping to shed
light on the mystery surrounding this useful face painting product.
You may have heard other painters talking about Starblends and
been curious about this new type of face paint. Starblend is actually pressed foundation
powder produced by Mehron. They come in about 56 colors, 14 of which are brightly
colored and can be used as a base for face painting designs.
Starblends work by adhering to the oils (sebum) in your
skin. Because sebum is a natural waterproofing for your epidermis, when the
Starblend adheres to those, they become very water resistant and aren’t easily
washed away with sweat either. This is one of the big advantages of the product
because they can extend your ability to work in extreme conditions such as heat
and cold.
Colors in my kit - light green is a blend of Green & Yellow |
For me, however, the biggest advantage is the ability to use
them without water. This makes them easier to use on male clients, particularly
young boys. You don’t have to be a face painter long before you realize that
boys hate to be sponged and brushed with wet paint. At my first fair, I had a
burly young man with tattoos come into my tent. He was being based in white for
a skull and was flinching and was very
uncomfortable. He proclaimed “this is worse than being tattooed!” After I
adopted the use of Starblends for full faces, I had another boy thank me for
using them because he didn’t feel anything as I applied the design.
I started using the product as an alternative to paint but
as I got more colors I realized how much I loved their powder properties that
made it much easier to shade and highlight designs. I started blending on the
face and in the applicator to get different shades and effects. It is almost an
airbrushed look with no streaking or lapping.
Cute Leopard - Model, Emma Cold |
One 56 gm Starblend cake can paint hundreds of faces. A
whole skull design can be based with one load of a powder puff. There is also
very little waste because there is nothing left behind on the applicator. The
applicator is tapped off back into the cake to remove the excess before
applying.
Ah, the excess! One of the biggest complaints I hear from
face painters is about the fall out. This is a makeup term for the powder that
falls on the surface below where you are applying, usually the cheeks or even
clothing. Just as for face paints, there is a learning curve to using them. I
have learned how to let gravity be my friend, rather than my enemy. When I am
applying a section of color, I start at the top (the forehead, above the
eyebrow, on the cheekbone) and the powder will come off the applicator a bit. I
then use that deposit to feed the application of color in the rest of that
section.
Another complaint is the coverage. They’ll show their
practically pink Spiderman designs and ask “what happened?” Starblend isn’t
applied like paints. Many times you can get away with just swiping a filled
sponge over the face. These are powders and need to be applied in a circular
motion as if you are putting foundation powder on. Most of the colors are very
vibrant and photograph well because of the matte finish. There are a few of the
colors that aren’t as opaque and may need a primer to adhere to normal skin.
Glycerin can be found in most drug stores and even craft stores in the baking section. |
Normally there are enough oils in the skin that there is no
problem with getting an opaque finish; however, I prefer to use a primer for the
blue, green, and purple colors. Makeup primers are quite expensive but I
stumbled upon a perfect primer that is also very inexpensive, glycerin. It’s labeled
as a “skin protectant” and is often stocked near the bandages in drug stores or
can be purchased online. It’s an ingredient in most face paints and I use it to
soften paints that have hardened. Only a drop is needed, in the hands or rubbed
into a foam makeup sponge, to prime an entire face. Painters worry that having
to apply a primer is going to nullify the positive attributes of Starblend use;
but, I find that few seconds is soon made up by removing water-loading from the
equation.
You may have heard, from fans of the product, that their
speed has really improved with use. This can be explained by simple mathematics.
They may be applied immediately without water management or activation. There is
minimal time spent reloading the applicator, sometimes just a press back on the
cake to pick up product is enough. Switching from one color to the next is not
a problem and colors can be mixed right in the applicator without dirtying the
cake. A stick sponge can be loaded with two colors, fill different areas and be
blended without returning to the pots or colors drying on the applicator. Six
colors can be applied to a design that would take twice as long with regular
paints and best yet, you can immediately start your line work without literally
watching paint dry.
Flaming Skull - Model, Taylor Cold |
There are three incidental benefits to repotting Starblend in
addition to the space saving. Many have found that the powders are now more
opaque when applied and I’ve found that new shades can be created or finicky
colors improved by mixing with hardier colors. I’ve replaced my regular green
with “new green” by mixing green and yellow equally. It’s more opaque and
bright and covers much better than green alone.
You can also create pots of custom colors with just a little
knowledge of color theory and a blender. After watching a class on zombies from
Nick & Brian Wolfe, I made myself little pots of ivory and “brownple” that
are fantastic too for vampires or bruising effects. Other painters have tried raspberry,
teal, light blue, peach and even adding Mehron precious gem powders before
repressing to get different effects. We fans of the product are hoping that
Mehron will expand the color offerings to similar colors to the ones in the Intense
eye shadow palettes.
Stick "Lollipop" Sponge Applicators |
Before buying an entire set of Starblends it is a good idea
to start with the most useful colors of white, black and red. White can be used
for tiger eyes and muzzles, kitty designs, skulls, sugar skulls, cows, lambs,
clowns, etc. Black can be used for evil eyes on boy designs, shading, drop
shadows, badgers, dogs, and mixed with white you open the door to all the gray
designs like rotten zombies, gorillas and elephants. Red is very helpful for
pirates, dragons, zombie mouths, and the two of the most intense line work
designs: Spiderman and Darth Maul.
You may not consider Starblend powders as a replacement for
your regular paints and there is a learning curve in their application; but,
they may allow you to perform in extreme conditions when using face paints may
be nearly impossible. They can keep you productive and making a profit during
the stickiest of situations when regular paints won’t work. They may pay for
themselves in one job that you would have normally declined in the past.
12 comments:
How well do Starblends show up on darker skin tones?
Oohlala, I've had great success on darker skin tones because it sits on top of the skin in an opaque layer. Corey Morgan and Linda Schrenk have both had excellent results with even the darkest skin tones. You can see a lot of images and get ideas in the "Starblend Creations" group on Facebook. Tell Peta "Denise sent me." :)
About time the starblends secrets are revealed! They are a must in every painter's arsenal...I also use mine to powder on stencil finishes on paint bases. Thanks Denise - you are talented and creative and have made the versatile combo of paint and powder a must for face painting!
Fantastic article Denise. You will open up the wonderful world of starblends to many more painters now, xxx
My email for the article tear drops and tiger strips on starblends. rvaquera70@gmail.com
. Thanks so much for sharing your magnific work
You have me interested to try them out now....... :-) Thanks for sharing this.
My email for the mailing list: huysmonique@gmail.com
Thanks Denise. I live in Florida and am having trouble with bleeding and melting. I've had several people recommend the Starblends but now I really want to try them. What have you found to be the best paints for line work on top of the starblends?
Lyne, I have a couple of videos that show the waterproof and sweatproof properties of Starblends and I used regular paints VS Ben Nye Magicake black. The Magicake is much better for both. It's a powder cake but activates well with water. It's not Wolfe, more like a dry Paradise, but if it's really hot where you are, it will be a life saver. I haven't tried them but Dips are water/sweat resistent but they are alcohol based so I'm not as keen on using them. If you click the Youtube link on the blog it will take you to my Youtube channel.
Just sent out two tutorial emails to 110 people. If you don't have it in your box, I probably don't have your email. Message me your email on Facebook or email me at denise@paintedparty.com. I will add your email address to the subscription list. Please verify your email when it comes through.
Thanks for your support and I hope you like the tutorials!
D.
Denise...when I have tried Starblends in the past, I've had two problems:
1. Sweaty skin made for streaky application. I think your "glycerine prime" will take care of that quite handily. Thank you!
2. Adding painted details was challenging, because the paintbrush wanted to skip across the surface of the paint. (I will admit I tried Starblends when I first starting painting 10 years ago -- so maybe it was me!) Is this something you've found? Do you have a solution?
Cindy, the line work just needs to be a little wetter than you might get away with over regular paint. I do rub in my Starblends pretty well too so there isn't much excess on the surface but sometimes I'll pick up some powder on my brush and I'll just dab it off on the towel.
Post a Comment